How to make a DIY Kite?

Choose two coordinating papers, and cut them both in half along the longest edge. The size is now 5.5 x 8.5″. Using a very strong glue stick, cover the back of one sheet with glue and place the other color on top. Smooth the page down, and make sure there are no bubbles. Using a ruler, measure and mark a spot at the top and bottom of your paper at 2.75″. Measure and mark the long edges at 3″. Use a ruler to connect the four marks and draw lines to make the kite shape. Cut out the kite. Cut a length of twine or string, and tie one end to a paper straw about 2/3 of the way down. Cut the second straw into thirds to get three pieces. Tie the other end of the twine to the middle of one of the paper straw pieces. This will be the kite handle. Add a drop of glue onto the knot you tied on the handle so that the string won’t slide off of the handle. Place the side of the kite that you want to be the bottom face up on the table. Using a ruler and a pencil, connect the corners to draw a cross. Squeeze a bead of craft glue along the cross. Place the straws into the glue to form your kite frame, and allow the glue to dry for a few minutes. Cut a 20″ piece of light-weight ribbon or string to make the kite tail. Thread it through the long straw, and add a bead of glue at the top of the straw to keep the string from falling out. Tie a few decorative ribbons to the tail, and allow all glue to dry completely.

The post How to make a DIY Kite? appeared first on interaksyonph.